Fault finding and repairs

Electrical fault finding in Dublin

Electrical fault finding is the testing that tracks down why power is tripping, failing or behaving oddly, so the cause gets fixed rather than the symptom. Fuse Electrical Services finds and repairs faults for homes and businesses across Dublin, using qualified testers with a current tester number. Call 087 121 1106.

Safe Electric and PSA registered. RECI member.

What makes an RCD or breaker keep tripping?

The usual causes are a faulty appliance, moisture in an outdoor socket or light, a cable damaged by a nail or screw, a loose connection, or a circuit carrying more than it was designed for.

An RCD trips when it detects current leaking to earth. A breaker trips on overload or a short circuit. Both are doing their job. Fault finding works out which circuit, and which part of it, is responsible.

How does Fuse find an electrical fault?

We start with the history: when it began, what was running, and whether it happens at a certain time of day or in wet weather. Then the circuit is isolated and tested, including insulation resistance and earth continuity, and appliances are ruled in or out one at a time.

Intermittent faults that only show up in damp weather or under load can take longer to pin down. If a second visit is likely, we tell you.

Can the fault be repaired on the same visit?

Often, yes. Loose connections, failed sockets and switches, damaged sections of cable and faulty RCDs can usually be repaired there and then.

If the testing shows the installation itself is worn out, for example old rubber or fabric covered cable, we make it safe, explain the options plainly and give you a free quote for a rewire or upgrade.

Why not just reset it and see?

Resetting a breaker that tripped for a reason leaves the fault in place. A loose connection keeps heating up, and a leak to earth keeps finding its way out. If a circuit trips more than once, have it tested before it fails at a worse time.

Last reviewed

Electrical fault finding in Dublin: your questions

Why does my electricity trip in wet weather?

Water getting into an outdoor socket, garden light, external cable or a damp wall box is the most common reason. The leak to earth trips the RCD. Fault finding locates the wet fitting so it can be sealed or replaced.

Why do my lights flicker?

A single flickering light is often the bulb or the fitting. Flickering across several rooms, especially when a heavy appliance switches on, can point to a loose connection or a supply problem and should be checked by an electrician.

Is a warm socket or switch dangerous?

A socket or switch that feels warm, smells of burning or shows brown marks has a loose or overloaded connection. Stop using it, switch off that circuit if you can do so safely, and call 087 121 1106.

Do you find faults in commercial and industrial buildings?

Yes. We carry out fault finding in offices, shops, warehouses and industrial premises across Dublin, including faults on emergency lighting and fire alarm systems.

Get a free, no obligation quote

Tell us what you need and we will come back to you with a price. For emergencies outside office hours, call us.